Compare concrete monitoring in the context of the work you manage: recurring precast production, individual pours or a broader construction risk program.
Published by Sensytec. Reviewed . This comparison is written by Sensytec for precast and prestressed plants, then contractors. Brickeye’s LumiCon serves precast as well as infrastructure and vertical construction. Vendor materials describe advertised capabilities, not results from a common performance test.
Evaluate Sensytec when the buying decision centers on connecting SensyCast monitoring, SensyCure companion-cylinder match curing and SensyHub QC plant records. Evaluate Brickeye LumiCon for remote concrete monitoring, particularly when the same organization is also considering Brickeye’s water mitigation and environmental risk services. This is a difference in evaluation scope, not proof that one platform is better for every pour.
For either supplier, begin with one production day or one representative placement. Show the team the mix, sensing locations, temperature limits, required reports and the person responsible for acting on the result.
On smaller screens, scroll across the table to compare all columns.
| Capability | Sensytec | Brickeye LumiCon |
|---|---|---|
| Concrete measurements | SensyCast records temperature and electrical resistivity; maturity estimates depend on a calibrated strength relationship. | Brickeye describes temperature, temperature differentials, maturity and strength estimates; confirm the proposed sensor option for humidity requirements. |
| Deployment | SensyCast uses gateway connectivity. SensyRoc II provides a Bluetooth phone option. Confirm installation and recovery in the quote. | LumiSense is an embedded sensor cable that connects to a LumiNode transmitter. Confirm the complete node and gateway configuration for the site. |
| Reporting | SensyHub provides monitoring access. SensyHub QC adds plant inspection and production records. | LumiCon publishes workflows for custom PDF reports, raw Excel downloads, concrete profiles and temperature alarms. |
| Plant match curing | SensyCure follows production temperature history for companion cylinders. | A companion-cylinder match-curing system was not established by the concrete-monitoring sources reviewed. Ask Brickeye if required. |
| QC scope | SensyHub QC describes inspections, batch and break logs, nonconformances and exports. | Evaluate the monitoring reports and request a demonstration of any additional bed, inspection, cylinder and release-record workflow. |
| Broader site services | This comparison covers Sensytec concrete monitoring, match curing and plant QC. | Brickeye also presents water mitigation and environmental risk services. Ask how the selected services share reporting and support. |
During a plant demonstration, ask both teams to show how a sensor reading connects to the bed, element or pour, the mix version, a cylinder test and an inspection record. SensyHub QC describes a plant workflow for these records. Confirm the implemented functions, any custom integration and what the export looks like. Check that the report includes the evidence required by the person responsible for your quality program.
LumiSense’s product page describes a sensor cable connected to a LumiNode. Ask which parts remain in the concrete, which are recovered, how cables are protected during stripping and what must be powered onsite. For SensyCast, verify the proposed installation and communication coverage with your forms and reinforcement. Compare equipment loss, consumables, charging effort and outage recovery on the same layout.
LumiCon’s help center documents reports, data downloads and concrete-profile workflows. Ask both vendors for an export from a representative placement, including timestamps, units, sensor identification and the inputs used for strength estimation. Verify that your team can retain and interpret its records after the monitoring period. Agree on alert ownership and what happens if a reading or connection is missing.
If your scope includes companion-cylinder temperature matching, evaluate SensyCure separately from concrete monitoring. The SensyCure controlled trial reports a Day 2 average tracking difference of 0.79°F and a maximum of 5.4°F for its tested setup. These figures are not a test against LumiCon or a guaranteed tolerance. Use an agreed temperature profile and measurement procedure for a plant trial.
Request the complete bill of materials, monitoring duration, connectivity, users, software functions, calibration services, training, support and data-retention terms. Treat optional services and custom integrations as named line items. Neither a maturity display nor a plant software checklist automatically establishes project acceptance or certification.
Yes. Brickeye presents LumiCon as its concrete-monitoring solution. Its broader offering also includes water mitigation and environmental risk services.
Yes. Brickeye explicitly lists precast among the applications served by LumiCon. Compare the proposed plant workflow and record requirements instead of assuming it is only for construction jobsites.
The published LumiSense product page describes an embedded sensor cable that must connect to a LumiNode transmitter. Confirm the complete communication, power and gateway setup for the proposed installation.
Do not assume so. Agree on the mix calibration, verification tests, records and decision procedure with the team responsible for project acceptance. Maturity estimates and monitoring data must be used within that approved procedure.
Include Sensytec when monitoring, companion-cylinder match curing and plant QC records are part of the same purchase. Evaluate SensyCast, SensyCure and SensyHub QC together using an actual production bed, cylinder record and inspection checklist.
Primary sources reviewed September 11, 2026. Product availability and specifications can change. An item not established by the pages reviewed is unconfirmed, rather than proof a supplier cannot provide it. This is a vendor-authored comparison, not an independent endorsement.
Explore an illustrative plant workflow and build your plant-trial checklist before requesting a project-specific demonstration.
Bring one production-bed schedule, an inspection checklist and a cylinder report. We can demonstrate the Sensytec workflow and identify the equipment, records and rollout your plant needs.
Plan a plant trial